Climate Essence IP65 Linear Luminaire Gerab Energy Systems

Overview

Gerab Energy Systems supplies the Climate Essence range, a high-efficacy sealed fitting built for warehouses, car parks, industrial floors, and covered utility spaces across the UAE. Purpose-built polycarbonate construction, tool-friendly wiring, and lumen outputs stretching up to 10,800 lm make this a sealed fitting that pairs long service life with rapid energy payback. Facility teams in Dubai, Abu Dhabi, and Sharjah rely on our LED batten light UAE inventory for retrofit programs and new-build MEP fitouts alike, where reduced maintenance intervals and stable colour performance are non-negotiable.

The Climate Essence pairs a rugged polycarbonate body with a frosted diffuser and anti-tamper stainless clips, delivering up to 180 lm/W across long linear runs. This weatherproof LED luminaire joins our wider LED batten light UAE range and suits surface or suspension mounting for warehouses, corridors, and covered outdoor walkways.

Polycarbonate housing with frosted diffuser resists dust, moisture, and impact in demanding operational settings.
Speedfit installation technology enables wiring without removing the geartray, reducing labour hours on large rollouts.
Pre-threaded end cable entries plus 20 mm side entries support flexible conduit routing and daisy-chain layouts.
BESA point surface mounting or optional stainless steel brackets accommodate varied ceiling and structural conditions.

Every design choice behind this fixture targets lower running cost and fewer maintenance interventions across the service life. Rated at 100,000 hours L70/B10 with IK08 impact protection and selectable outputs, the lighting range anchors our industrial linear lighting portfolio for multi-zone commissioning on large sites.

Up to 180 lm/W efficacy, reducing energy load versus legacy fluorescent battens by 40 to 60 percent.
L70/B10 rated life of 100,000 hours minimises replacement cycles in high ceiling installations.
IK08 impact rating and anti-tamper stainless clips withstand accidental knocks and unauthorised access.
Dual switch selectable outputs allow lumen tuning between 3,300 lm and 10,200 lm on the same fixture body.
Optional dimmable, DALI addressable, emergency, and Luceco Platform Wireless configurations for control ready installs.
4000K neutral white output with CRI greater than 80 and SDCM under 3 for visually consistent illumination.

Technical specifications for our IP65 linear luminaire align with the EN 60598 luminaire standards and EN 61000 EMC requirements, letting specifiers drop the fixture into projects already governed by IEC aligned electrical codes across the Gulf.

Lumen range: 3,300 lm to 10,800 lm across fixed output SKUs, with selectable output extending flexibility.
Wattage options: 19W, 22W, 32W, 34W, and 60W matched to lumen tier and body length.
Body length: 4 ft (1240 mm) and 5 ft (1540 mm) with 100 mm x 80 mm profile.
Voltage: 220 to 240V, 50 to 60 Hz frequency compatibility.
Colour temperature: 4000K neutral white, CRI greater than 80, SDCM less than 3.
Ingress and impact: IP65 rated enclosure with IK08 mechanical protection.
Operating temperature: minus 20°C to plus 40°C ambient, 25°C rated life reference.
Lifetime and warranty: 100,000 hours L70/B10, backed by a 7 year manufacturer warranty.