Atlas LED Bulkhead Luminaire

Atlas LED Bulkhead Luminaire

Robust circular fixture engineered for internal corridors, stairwells, entryways, and exterior facades, combining decorative styling with commercial grade performance across UAE hospitality, residential, retail, and infrastructure environments.

Overview

Gerab Energy Systems supplies the Luceco – Atlas polycarbonate LED bulkhead, an IP65 bulkhead light engineered for reliable amenity illumination across UAE commercial, hospitality, and infrastructure buildings. Its 317mm surface mount bulkhead housing pairs 100 lumens per watt efficacy with a 50,000 hour rated life, delivering low operating cost, straightforward installation, and consistent output across internal ceilings and outdoor bulkhead fitting locations

Atlas LED Bulkhead Luminaire
Atlas LED Bulkhead Luminaire

The Atlas fixture pairs a slim circular profile with utility grade performance, giving specifiers one decorative bulkhead light suitable for stairwells, walkways, garages, service corridors, and building perimeters. Its integrated PCB light engine and diffuser produce even, low glare output, while flexible conduit routing simplifies retrofit and new build electrical work on projects across the Emirates

  • Ø317mm circular body manufactured from high impact polycarbonate offers corrosion resistance and long service life in humid Gulf coastal climates without the pitting common to aluminium alternatives.
  • Combined IP65 sealing and IK08 impact rating protects against dust ingress, water jets, and mechanical damage on exposed soffits, covered walkways, and service entries.
  • Two lumen variants (1,250lm at 12.5W or 2,100lm at 21W) deliver appropriate light levels for narrow entryways, wider hotel lobbies, and open parking bays.

Every specification choice behind this fixture targets three outcomes: lower operating cost, faster installation, and longer maintenance intervals. Driver, LED board, gear tray, and diffuser combine inside a single sealed enclosure, giving consultants a reliable commercial bulkhead lighting option for large estates where fixture standardisation, spares management, and consistent aesthetic finish matter across every asset installed.

  • Four side and one rear conduit entry points let electricians route cabling through walls or ceilings without external adapters, cutting installation time on repeat fit projects.
  • Optional 3-hour battery module converts the fixture into an emergency bulkhead luminaire
  • Integrated microwave sensor bulkhead variant supports 0% and 10% corridor dim modes, holding presence detection without visible sensor housings or additional control wiring.
  • CRI above 80, UGR below 20, and SDCM under 3 combine to deliver consistent colour rendering, low glare, and uniform luminaire appearance across every unit fitted on a facade.

Every Atlas fixture ships tested against EN 60598-1, EN 60598-2-1, EN 60598-2-22, and EN 61547 compliance standards, giving MEP consultants a documented baseline for tender submissions and design reviews. The parameters listed below cover electrical, optical, mechanical, and environmental values relevant to procurement, installation planning, and long term asset management on any UAE lighting project.

  • Electrical: 220 to 240V input, 50Hz operating frequency, 12.5W or 21W total system load, power factor above 0.9, class II insulation.
  • Optical:1,250lm or 2,100lm luminaire output, 100 lm/W efficacy, 3000K standard warm white or 4000K optional neutral white CCT, CRI above 80, UGR below 20, SDCM under 3.
  • Mechanical:Ø317mm diameter, 105mm depth, 1.3 to 1.7kg unit weight, high impact polycarbonate housing, RAL9016 white finish, IK08 impact rating.
  • Environmental: IP65 ingress protection, operating range The fixed-output 2,100 lm model at –20°C to +25°C; the microwave/emergency 1,250 lm version at 0°C to +25°C

Applications

Hotel Corridors & Back-of-House

Hotel Corridors & Back-of-House

Residential Stairwells & Lobbies

Residential Stairwells & Lobbies

Parking Garages & Basements

Parking Garages & Basements

Warehouse & Utility Rooms

Warehouse & Utility Rooms

Schools & Campus Facilities

Schools & Campus Facilities

Hospital & Clinic Corridors

Hospital & Clinic Corridors

Retail Storage & Loading Bays

Retail Storage & Loading Bays

Villa Entryways & External Walls

Villa Entryways & External Walls

Key Projects

Atlas bulkheads illuminate amenity zones across UAE hospitality resorts, residential towers, healthcare facilities, and infrastructure assets. Explore selected installations where this fixture delivered code compliant emergency lighting, low glare wayfinding, and years of maintenance free performance for facility owners, developers, and MEP consultants managing large property portfolios.

Project Name: LED LIGHTING AT IRRIGATION PUMPING STATION AL FURJAN 02
Location: DUBAI
Year Of Supply : 2022
Application: LED LIGHTING WEATHER PROOF INDOOR
End Client: NAKHEEL
Consultant: ARIF & BINTOAK
Led Brand: LUCECO
Project Name: LED LIGHTING AT IRRIGATION PUMPING STATION ARABIAN RANCHES II
Location: DUBAI
Year Of Supply : 2023
Application: LED LIGHTING WEATHER PROOF INDOOR
End Client: EMAAR
Consultant: WME
Led Brand: LUCECO
Project Name: LED LIGHTING AT IRRIGATION PUMPING STATION ARABIAN RANCHES III
Location: DUBAI
Year Of Supply : 2023
Application: LED LIGHTING WEATHER PROOF INDOOR
End Client: EMAAR
Consultant: WME
Led Brand: LUCECO
Project Name: DUBAI SOUTH PUMPING ROOMS
Location: DUBAI
Year Of Supply : 2025
Application: LED HIGHBAY & WEATHER PROOF LIGHTING
End Client: DUBAI SOUTH
Consultant: DEC
Led Brand: LUCECO